Loading ...
Loading ...
Loading ...
OPERATION
HOW TO USE YOUR CHAIN SAW
STOPPING YOUR ENGINE
- Move on/stop switch tothe "STOP" position,
- If engine does not stop, pull blue choke knob out fully
CHAIN OILER (Fig. 17)
• The chain oiler provides continuous lubrication to the
chain and guide bar Be sure to fill the bar oil tank
when you fill the fuel tank (Capacity=98 fLoz,)
• Your chain saw will consume approximately one tank
of bar oil for each tank of fuel used.
Your chain oiler is automatic and requires no adjustment
Bat
capX
Front Handle
Fuel Mix Fiil Cap
Figure 17
THROTTLE CONTROL GROUP (Fig. 18 & 19)
THROTTLE LOCKOUT
• The throttle lockout prevents unintentional actuation of
the throttle trigger.
• You must depress the throttle lockout with the palm of
your hand before actuating the throttle trigger.
Thrott{e /A
L_o_I _ _=_
Trigger
!/
Figure 18
CHOKE/FAST IDLE SPEED
• The choke and fast idle speed are set by pulling the
choke lever out fully for cold or refueled engine starts,
• Squeezing the throttle trigger will release the choke
and fast idle settings.,If the throttle trigger is squeezed
accidentally during starting, it will be necessary to
reset throttle advance by pulling choke lever out fully°
__ Choke Pos_lons
I U '-'
Off Full
I o sto,
Figure 19
THROTTLE TRIGGER
" The throttle trigger allows for variable control of
engine speed°
• The throttle trigger is actuated by the index finger on
your right hand (After the throttle lockout is
depressed),
-1!
Loading ...
Loading ...
Loading ...