Loading ...
Loading ...
Loading ...
OPERATION
KNOW YOUR CHAIN SAW (Fig, 16)
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the
illustrations with your unit to familiarize yourself with the location of the various controls and adjustments° Save this
manual for future reference,.
_HAND GUARD FRONT
/ _.,_/HANDLE STARTER
/ L"_ ROPE HANDLE
CHAIN r _ _ t SWITCH
" "-,\ A'
F1LLCAP J F U|JlIIIIItlt 7._ _- | /,_,_.,,,=
- , o
CYLINDER AND AIR FILTER
COVER 1
THROTTLE
LOCKOUT
/
STARTER
HOUSING
MUFFLER
ADJUSTING
SCREW
REAR
HANDLE
FUEL MIX
FILL CAP
CHAIN TRAVEL
DIRECTION
{:RRFTSMRNo
THROTTLE
TRIGGER BAR CLAMP
BAR CLAMP
NUTS
CHOKE!
FAST,IDLE
CONTROL
I\1
Figure 16
Listed by Underwriters Laboratories, Inc.
in accordance with American National Standards for Gasoline-Powered Chain Saws Safety Requirements
(ANSI B175.14991).
GUIDE BAR
The ON/STOP SWITCH is used to stop the engine,
The STARTER ROPE HANDLE is used for starting the
engine.
The CHOKE/FAST IDLE CONTROL provides addition-
al fuel to the engine when stating a cold engine, and
sets the throttle to "Fast Idle" position
The THROTTLE LOCKOUT prevents the THROTTLE
TRIGGER from being squeezed accidentally
The THROTTLE TRIGGER controls engine speed and
disengages the CHOKE/FAST IDLE control if set.
The GUIDE BAR is designed to carry the chain.
The CUTTERS are designed to cut the wood.
The BAR CLAMP NUTS are designed to hofd the
guide bar after adjustments have been completed.
The ADJUSTING SCREW is designed to tension the
chain around the guide bar.
-10-
Loading ...
Loading ...
Loading ...