Loading ...
Loading ...
Loading ...
PROBLEM
White residue appears
on front of access
panel
WATER HEATING
signal light flashes
Control panel does not
work
All signal lights flash
end the dishwasher
stops or will not run
Control panel does not
=boep" when pads are
pressed
Dishwasher drains
after turning off
CLEAN signal light
and/or closing the
door
CHECK THE FOLLOWING
Is too much detergent being used? See pages 14 and 15 for
recommended amounts of detergent.
Some liquiddetergents develop excess foam and build up on
access panel. Try a different brand to reduce foaming and
eliminate build-up.
Is the water supply less than 120°F (49°C) when it entem the
dishwasher? See pages 10 and 17.
Isthe door open?
Is the cycle pause feature on? See page 7.
Isthe control panel lock-out feature on? See page 9.
Has there been a power failure? See page 11.
Is the control panel lock-out feature on? See page 9.
Did you accidentaly press the CANCEL/DRAIN pad while
closingthe door? Press CANCEL/DRAIN pad again to stop
draining. Restart cycle ifneeded.
28
Loading ...
Loading ...
Loading ...