Loading ...
Loading ...
Loading ...
Heat Dry option
When the Heat Dry option is selected, air in
the dishwasher is heated during the =dry"
part of the cycle. The HEAT DRY signal light
will be on when this option is selected. For
best drying results, use a liquid rinse agent.
NOTE: The Heat Dry option is not available
during the Rinse & Hold cycle.
Air Dry option
When the Air Dry option is selected, air in
the dishwasher is not heated during the "dry"
part of the cycle. The AIR DRY signal light
will be on when this option is selected. The
Air Dry option helps save energy, but the
load takes longer to dry (overnight) and
some spotting may result. Some items,
(such as plastics) may need towel drying.
For best drying results, use a liquid rinse
agent.
Hi-Temp option
When the Hi-Temp Wash option is selected,
water is heated in the dishwasher during the
main wash to improve washability. The Hi-
Temp Wash option is automatically selected
for both washes of the Pots & Pans cycle.
See =Cycle selection chart" on pages 11
and 12.
NOTE:
• The HI-TEMP signal light will be on when
this option is selected.
• The cycle will pause while the water is
heating.
• When the water temperature reaches
135°F (570C), the cycle will begin again.
• The heating time is based on the tempera-
ture of the water supply as it enters the
dishwasher. The cooler the water, the
longer the heating time.
If water temperature at the faucet is
below 120°F (49°C), have a qualified
person raise the water heater's thermostat
setting. See page 17.
• The dishwasher does not pause to heat
the water ifthe water entering the dish-
washer is already 135°F (57°C).
13
Loading ...
Loading ...
Loading ...