Loading ...
Loading ...
Loading ...
5. Fastenthelockingcollarandsnapintoplate(seeFig.6-1,6-2).
Note:Thelockingmechanismshouldbeinbackofthechute.
Ifyouhavetroubleinstallingthedischargechute,pleasevisit
www.snowjoe.comforastepbystepassemblyvideo.Youcan
alsocalltollfree866-Snow-JoeforlivesupportMondaytoFriday
9am-5pmEasterntime.
6. Loosentheknobsfoundonthetopofthechuteassembly
andpivottheupperchuteupordowntothedesiredangle.
Tightentheknobsbeforeoperatingthesnowthrower.
7. Usethechutehandletopositionthedirectionyouwantto
throwthesnow(seeFig.7).
Note: Never lift the unit by the chute handle
Figure 6-1
\
Chute Handle
Figure 7
Figure 6=2
Fuel Recommendation
Use automotive gasoline (unleaded or low leaded to minimize
combustion chamber deposits) with a minimum of 87 octane.
Gasoline with up to 10% ethanol or 15% MTBE (Methyl Tertiary
Butyl Ether) can be used. Do not use an oil/gasoline mixture, dirty
or E85 gasoline. Avoid getting dirt, dust, or water in the fuel tank.
o Refuel in a well-ventilated area with the engine stopped. Do
not smoke or allow flames or sparks in the area where the
engine is refueled or where gasoline is stored.
o Do not overfill the fuel tank. After refueling, make sure the
tank cap is closed properly and securely.
o Be careful not to spill fuel when refueling. Spilled fuel or
fuel vapor may ignite. If any fuel is spilled, make sure the
area is dry before starting the engine.
o Avoid gasoline contact with skin or breathing of vapor.
Loading ...
Loading ...
Loading ...