Loading ...
Loading ...
Loading ...
Assembly
NOTE: Reference to right or left side of the snow thrower is
determined from behind the unit in the operating position. The
"operator's position" is defined as standing directly behind the
snow thrower.
Unpacking
The contents of the carton include:
o (1) Snow thrower
o (2) Ignition/Safety keys (secured to unit)
o (1) Operator's manual
o (1) Oil funnel for adding engine oil
o (1) Chute locking collar (secured to discharge chute)
o (1) 5/8 Spark plug wrench
o (1) Electric cord
o (1) Oil can (empty)
o Remove snow thrower from the carton.
o If necessary, remove and discard plastic bag that covers the unit.
o Remove any loose parts included with the unit.
Control Cable Attachment
1. With the upper handle in the down position, connect the
control cable to the Auger control.
Note: Connect the control cable to the lower hole first. You
may need to adjust this setting prior to use. See 'Adjustments to
Control Cable' on page 13.
Upper and Lower Handle
1. Pivot the upper handle into the operating position until it
clicks. Ensure the cable is not pinched in the process, or
wrapped around the lower left engine casing or oil drain plug
(see Fig. 2-1 and 2-2).
2. Tighten the wing knobs to secure the handle in place
(see Fig. 2-3).
Upper Handle
_//
_J
/
Control Handle
Figure 2=1
/
Control Cable
Figure 1
Figure 2=2
Loading ...
Loading ...
Loading ...