Loading ...
Loading ...
Loading ...
Replacing the Auger Paddles
CAUTION
Do not allow the auger's rubber paddles to wear to
the point where portions of the metal auger itself can
come in contact with the pavement. Doing so can
result in serious damage to your snow thrower.
To replace the rubber paddles:
1. Remove the existing rubber paddles by unthreading the
self-tapping screws that secure them to the auger.
Self=Tapping Screws
Figure 23
2. Secure the replacement rubber paddles to the auger housing.
Storage
Cleaning the Engine
z_ WARNING
Accumulation of debris around the muffler could
cause a fire. Inspect and clean before every use.
z_ CAUTION
Do not spray the engine with water to clean it because
the water could contaminate the fuel. Using a garden
hose or pressure washing equipment can also force
water into the muffler opening. Water that passes
through the muffler can enter the cylinder and cause
damage.
If the engine has been running, allow it to cool for at
least half an hour before cleaning.
Periodically remove dirt build-up from engine.
Off- Season Storage
Engines stored over 30 days need to be drained of fuel to prevent
deterioration and gum from forming in the fuel system or on essential
carburetor parts. If the gasoline in your engine deteriorates during
storage, you may need to have the carburetor, and other fuel system
components, serviced or replaced.
If the snow thrower will not be used for 30 days or longer, follow
these instructions:
1. Remove all fuel from the tank by running the engine until it
stops.
2. Change the engine oil.
3. Remove the spark plug and pour approximately 1 oz. (30ml)
of clean engine oil into the cylinder. Pull the Recoil Starter
several times to distribute the oil, and reinstall the spark plug.
4. Clean debris from around the engine and behind the muf
fler. Apply a light film of oil on any areas that are susceptible
to rust.
5. Store in a clean, dry, well ventilated area away from any
appliance that operates with a flame or pilot light, such as a
furnace, water heater or clothes dryer. Avoid any area with
a spark producing electric motor, or where power tools
are operated.
6. If possible, avoid storage areas with high humidity.
7. Keep the engine level in storage. Tilting the engine can cause
fuel or oil leakage.
16
Loading ...
Loading ...
Loading ...