Loading ...
Loading ...
Loading ...
Troubleshooting
Problem Cause
Excessive vibration
Unit fails to propel itself
Augers continue to rotate
Unit fails to discharge
snow
1. Loose parts or damaged auger.
1. Auger control cable out of
adjustment.
2. Drive belt loose or damaged.
1. Auger control cable out of
adjustment.
1. Chute assembly clogged.
2. Foreign object lodged in auger.
3. Auger control cable in need of
adjustment.
Remedy
1. Stop the engine immediately
and disconnect the spark plug
wire. Tighten all bolts and nuts.
If vibration continues, have the
unit serviced by an authorized
service dealer.
1. Adjust auger control cable.
Refer to Maintenance and
Adjustments Section.
2. Replace drive belt. Refer to
the Maintenance and
Adjustments section.
1. Adjust auger control cable as
shown in Maintenance and
Adjustments section.
1. Stop engine and disconnect
spark plug wire. Clean chute
and inside of auger housing
with clean-out tool or a stick.
2. Stop engine immediately and
disconnect spark plug wire.
Remove object from auger.
3. Adjust auger control cable.
Refer to Maintenance and
Adjustments section.
18
Loading ...
Loading ...