Loading ...
Loading ...
Loading ...
Troubleshooting
Problem
Engine fails to start
Engine runs erratic
Loss of power
Engine Overheats
Loss of power
Cause
1. Fuel tank empty, or stale fuel 1.
2. Blocked fuel line
3. Key not inserted all the way.
4. Spark plug wire disconnected. 2.
5. Faulty spark plug 3.
6. Primer button not being used 4.
properly. 5.
7. Engine flooded from excessive
priming. 6.
8. Throttle may be in the STOP
position. 7.
8.
1. Unit running on CHOKE 1.
2. Blocked fuel line or stale fuel 2.
3. Water or dirt in the fuel system
4. Carburetor our of adjustment 3.
4.
1. Spark plug wire loose
2. Gas cap vent hole plugged
1. Carburetor out of adjustment
1. Spark plug wire loose.
2. Vent in gas cap plugged.
Remedy
Fill tank with clean, fresh
gasoline. Fuel becomes stale
after thirty days.
Clean the fuel line.
Insert key all the way.
Connect spark plug wire.
Clean spark plug, readjust gap
or replace.
Prime engine five to seven
times.
Wait at least ten minutes before
starting.
Move the throttle to the RUN
position.
Move the Choke Control to RUN.
Clean the fuel line; fill the tank
with clean fresh gasoline.
Drain the fuel tank and
carburetor. Refill with fresh fuel.
Contact an authorized Service
Center.
1. Connect and tighten spark plug
wire.
2. Remove ice and snow from gas
cap. Be certain vent hole is clear.
1. Contact an authorized Service
Center.
1. Firmly connect spark plug wire.
2. Clear vent.
17
Loading ...
Loading ...
Loading ...