Loading ...
Loading ...
Loading ...
15
MINIMUM BURNER SETTING ADJUSTMENT
tap set to the minimum position. If some ports do not light, increase the minimum gas rate
setting.
Check whether the burner remains lit even when the gas tap is turned quickly from the
maximum to the minimum position. If the burner does not remain lit, increase the minimum
gas rate setting.
The procedure for adjusting the minimum gas rate setting is described below.
Auxiliary, Semi-rapid and Rapid burner
Normally for ULPG fully tighten the adjustment screw.
Triple-ring burner (only for the models DEGH70BG, DEGH90BG)
Normally for ULPG fully tighten the adjustment screw, then turn the screw 3/8 anti-
clockwise.
LUBRICATING THE GAS TAP
high-temperature-resistant grease on it.
Note: Servicing of this appliance is only to be carried out by Authorised Person.
A
Figure 11
Loading ...
Loading ...
Loading ...