Loading ...
Loading ...
Loading ...
2. From the device list, click the device name.
3. Click the Tools tab in the top-right of the screen.
4. In the IP address/FQDA field in the Ping section, enter a valid IP address or FQDA.
5. Click Ping.
Performing a Device Traceroute Test
A traceroute test can be used to analyze the amount of hops a data packet requires to reach its destination. This may be useful to
diagnose slow data transmissions.
1. Navigate to Configure > Access Point > Devices.
2. From the device list, click the device name.
3. Click the Tools tab in the top-right of the screen.
4. In the IP address/FQDA field in the Traceroute section, enter a valid IP address or FQDA.
5. Click Traceroute.
Performing a Blink LED Test
A blink LED diagnostics test is used to verify the indicator LEDs on the tested device are working correctly.
1. Navigate to Configure > Access Point > Devices.
2. From the device list, click the device name.
3. Click the Tools tab in the top-right of the screen.
4. In the Others section, click Start to start the test.
Note: The Start button will change to Stop once the test begins.
5. Click Stop to stop the test.
Manually Rebooting a Device
1. Navigate to Configure > Access Point > Devices.
2. From the device list, click the device name.
3. Click the Tools tab in the top-right of the screen.
4. In the Others section, click Reboot.
Adding a License Key to a Device
1. Navigate to Configure > Access Point > Devices.
2. From the device list, click the device name.
3. Click the License tab in the top-right of the screen.
4. In the License Table section, click Add License.
5. Enter a valid license key.
6. Click Save.
Deleting a License Key From a Device
1. Navigate to Configure > Access Point > Devices.
2. From the device list, click the device name.
3. Click the License tab in the top-right of the screen.
4. In the License Table section, from the license key list, click Delete under the Actions column of the license key you wish
to delete.
5. When prompted to confirm, click Yes.
Note: Deleting a license key from a device will move it back to the license management inventory until it is reassigned
to another device.
Loading ...
Loading ...
Loading ...