Loading ...
Loading ...
Loading ...
1. Navigate to Configure > Access Point > Profiles.
2. From the Profile list, click RADIO under the Actions column of the Profile you wish to edit radio settings for.
3. Click the Advanced tab.
4. Specify the following information:
Note: The settings below apply to both the 2.4 GHz and 5 GHz bands.
Multi-cast rate
Select the multi-cast rate for the 2.4 GHz and 5 GHz wireless bands from the drop-
down menu. This value determines the minimal signal quality for connection. A lower
rate allows longer, weaker signals to connect. A higher rate only allows shorter,
stronger signals to connect.
Beacon interval
Enter a beacon interval value (in ms) between 40 and 3500. This determines the delay
in ms between each information beacon broadcasted by the AP.
DTIM interval
Enter a DTIM interval value between 1 and 255. This determines the delay between
each Delivery Traffic Indication Map (DTIM). The value represents the number of
beacons sent before a DTIM is sent.
Preamble mode
Choose a preamble mode. This determines the data string length for error checking
purposes.
Long: Slower, but more accurate.
Short: Faster, but less accurate.
Protection Mode
Select a protection mode from the drop-down menu.
None: No protection applied.
CTS-to-Self Protection: mode for mixed-mode environments with 802.11b devices.
UAPSD
Choose to enable or disable UAPSD. This feature allows connected clients to save
power.
Loading ...
Loading ...
Loading ...