Loading ...
Loading ...
Loading ...
VLAN mode
Select the VLAN type.
Tagged: Adds an 802.1Q header to traffic.
Untagged: Does not add a tag to traffic.
VLAN tag
If the VLAN mode is set to Tagged, specify a VLAN tag. This will segment traffic with
the respective VLAN tag.
14. Choose to enable or disable Station Isolation. This prevents clients connected to the same SSID from communicating
with each other.
15. Choose to enable URL redirection.
16. If URL redirection is enabled, specify the following information:
URL for redirection Enter the URL clients connecting to the SSID will be redirected to.
Redirection interval Enter the time (in minutes) clients will be periodically redirected to the URL.
17. Click Save.
18. Click Push Configuration.
Configuring Basic SSID Settings Using WPA, WPA+WPA2 With
Preshared Key Authentication
1. Navigate to Configure > Access Point > Profiles.
2. From the Profile list, click SSID under the Actions column of the Profile of the SSID you wish to edit.
3. From the SSID list, click the SSID name of the SSID you wish to edit.
4. In the SSID configuration window, click the Basic tab.
5. From the Security drop-down menu, select WPA or WPA+WPA2.
6. From the Auth Method drop-down menu, selectPSK.
7. Specify the following information:
Encryption Select an encryption method.
Pre-shared key Enter a pre-shared key which clients will need to enter in order to connect to the SSID.
Group key update interval
Set the interval (in seconds) at which the group key is updated for the SSID. The default
is 3600 seconds.
8. Choose to enable or disable SSID broadcasting.
Note: If SSID broadcasting is disabled, users will not see the SSID on their device.
Loading ...
Loading ...
Loading ...