Loading ...
Loading ...
Loading ...
IGMP Snooping
Select an IGMP policy.
Enable: The switch will subscribe to and receive multicast traffic.
Disable: The switch will not receive multicast traffic.
6. [Optional] Click Add to add switches to the IGMP list.
7. Click Add.
8. [Optional] To delete a switch from the list, check the checkbox next to the switch and click Delete.
9. Click Save.
10. Click Push Configuration.
Configuring DHCP Server Screening
DHCP screening allows administrators to whitelist DHCP servers to prevent unauthorized DHCP servers and devices from
gaining access to the network.
1. Navigate to Configure > Switch > Profiles.
2. From the Profile list, click Settings under the Actions column of the Profile you wish to edit.
3. Click the Basic tab.
4. In the DHCP Server Screening Configuration section, select Enable next to DHCP Server Screening.
5. In the Allowed DHCP server field, enter the IP address of the DHCP server to whitelist.
Note: Currently, only one DHCP server can be whitelisted.
6. Click Save.
7. Click Push Configuration.
Configuring Voice VLAN Functionality
Voice traffic from IP phones can be assigned to a dedicated VLAN (via Voice VLAN ID setting) and given traffic priority (via Voice
VLAN CoS setting).
Note: Voice VLAN priority settings overrule any priority settings configured in the Quality of Service section.
Note: Voice VLAN is not supported if the port type is set to “Trunk”.
1. Navigate to Configure > Switch > Profiles.
2. From the Profile list, click Settings under the Actions column of the Profile you wish to edit.
3. Click the Basic tab.
4. In the Voice VLAN Configuration section, select Enable next to Voice VLAN.
5. In the Voice VLAN ID field, enter an ID between 2 and 4094.
6. Select a Voice VLAN Class of Service (CoS) level from the drop-down menu.
Note: The CoS level reflects the priority level of Voice VLAN traffic. A higher value means a high priority, whereas a
lower value means a low priority.
7. [Optional] Click Add to add a Voice VLAN OUI.
Note: An Organizationally Unique Identifier (OUI) is used to add additional manufacturers to the voice VLAN
identification list.
8. In the Add OUIs for switches window, specify the following information:
OUI Address This field will contain which MAC address range the OUI mask will begin with.
Loading ...
Loading ...
Loading ...