Loading ...
Loading ...
Loading ...
Performing a Device Ping Test
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Tools tab in the top-right of the screen.
3. In the IP address/FQDA field in the Ping section, enter a valid IP address or FQDA.
4. Click Ping.
Performing a MAC Forwarding Table Test
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Tools tab in the top-right of the screen.
3. In the MAC Forwarding Table section, click Run.
Performing a Cable Test
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Tools tab in the top-right of the screen.
3. In the Cable Test section, enter the port numbers to run the cable test on.
Note: The scan will only be performed on ports with a physical connection.
4. Click Test.
Performing a Port Cycle Test
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Tools tab in the top-right of the screen.
3. In the Cycle Port section, enter the port numbers to run the cable test on.
4. Click Test.
Performing a Blink LED Test
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Tools tab in the top-right of the screen.
3. In the Others section, click Start.
Note: The Start button will change to Stop once the test begins.
4. Click Stop to end the test.
Manually Rebooting a Device
1. Navigate to Monitor > Switch > Device and select a device from the list.
2. Select the Tools tab in the top-right of the screen.
3. In the Others section, click Reboot.
Loading ...
Loading ...
Loading ...