Loading ...
Loading ...
Loading ...
7. Click Push Configuration.
Splitting Aggregated Switch Ports
Linked port groups can be split into their respective individual ports. Splitting port groups will undo all aggregation settings
applied to the affected ports.
Note: These local settings will override any conflicting Profile settings associated with the device.
1. Navigate to Configure > Switch > Switch Ports.
2. From the port list, check the box next to the aggregated port(s) you wish to split.
3. Click Split.
Note: This will immediately split the selected aggregated ports.
Mirroring Port Traffic to Another Switch Port
Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming and/or outgoing packet from one
port of the switch to another port, where the packet can be studied. This enables network managers to better monitor network
performance.
Note: These local settings will override any conflicting Profile settings associated with the device.
1. Navigate to Configure > Switch > Switch Ports.
2. From the port list, check the box next to the port(s) you wish to mirror.
3. Click Mirror.
4. Specify the following information:
Source ports
Select the data to mirror from the drop-down menu for each selected port.
Both: Mirror both incoming and outgoing.
Rx: Mirror only data received on the port.
Tx: Mirror only data transmitted by the port.
Destination port
Enter the destination port number.
Note: The port number should be in numerical format, for example 28.
5. Click Create port mirror.
Loading ...
Loading ...
Loading ...