Loading ...
Loading ...
Loading ...
Before first use
18
Remove any protective foil and stick-
ers.
Do not remove stickers carrying
safety or installation information or
the data plate.
This makes it easier to perform servic-
ing and repair work.
Cleaning the drawer for the
first time
Remove the non-slip liner and (if
present) the wire rack from the
drawer. Clean both with warm water
and liquid dish soap, applied with a
soft sponge or microfiber cloth.
Dry the non-slip liner and the wire
rack with a soft cloth.
Wipe the drawer inside and out with a
damp cloth to remove any dust or
left-over packaging.
Dry all surfaces with a soft cloth.
Replace the non-slip liner and the
wire rack (if applicable) in the drawer.
Heating up the drawer for the
first time
Heat the empty drawer for at least
2hours.
Touch the sensor control to switch
the drawer on.
Touch the Menusensor control re-
peatedly until the symbol lights
up.
Touch the sensor control repeat-
edly until the segment on the far
right-hand side of the temperature
display lights up.
Touch the sensor control repeat-
edly until 2h lights up.
Close the drawer.
The drawer is equipped with a contact
switch. This ensures that the heating
element and fan in the appliance only
work when the drawer is closed.
The drawer will switch itself off auto-
matically after 2hours.
The metal components have a protec-
tive coating. For that reason they will
give off a slight smell temporarily when
the drawer is heated for the first time.
The smell and any vapors given off will
dissipate after a short time and do not
indicate a faulty connection or appli-
ance.
It is important to ensure that the kitchen
is well ventilated when heating the
drawer for the first time.
Loading ...
Loading ...
Loading ...