Loading ...
Loading ...
Loading ...
Safety Tips
18 / 24
Number: JT190199989 Version Number: A1
Note: Subsequent versions of this specification are subject to change without prior notice. Thank you
Maintenance
15. Removal from service /
Winterization
Note
If water is left in the machine in an
environment below 0°C, it may cause serious
damage to the machine parts. This fault is not
covered by warranty
Special protection measures are
required if the ice maker is out of service for
a long period of time or exposed to an
environment of 0°C or less. Follow these
steps below:
Disconnect the power of the ice maker.
Disconnect the water supply to the ice
maker.
Empty the sink.
Remove water inlet hose and drain it
from the water inlet.
Ensure that there is no water residue in
the inlet, drain and distribution pipes..
16. Maintenance
Warning
Component parts shall be replaced with
like components and that servicing shall be
done by factory authorized service
personnel, so as to minimize the risk of
possible ignition due to incorrect parts or
improper service.
Before applying for repair, please consider the
following aspects in order to quickly identify and
improve the efficiency of machine recovery .
a). Whether the water supply is normally,
including faucets open, inlet valve not
blocked, and water pressure is in 1bar~5bar.
b). Whether the power supply is normal,
including voltage is in ±10% of rated voltage,
power switch is connected, the fuse is not
burnt out and whether the plug is fixed well
c). Whether the ambient temperature is too
high or too low (the operating temperature
range of the ice maker is 10°C～38°C),
whether the water temperature is too high or
too low (the water temperature range is
5°C～32°C).
d). Whether the ice bin is full of ice and can
work after ice take away.
Write down the number of the machine and call
the toll-free phone number labeled with the
service label or your service provider
Loading ...
Loading ...
Loading ...