Loading ...
Loading ...
Loading ...
Safety Tips
15 / 24
Number: JT190199989 Version Number: A1
Note: Subsequent versions of this specification are subject to change without prior notice. Thank you
Cleaning and disinfection
Brush water pipe mandrel brush pump bottom
Plastic parts around brush steam
Brush evaporator
Brush sink
Flush evaporator
Flush hose and mandrel
10.
Remove the soaked parts and rinse them with
clean water (5 times).
14.2 Disinfection process
1. Mix 8 liters of warm water (45~50℃) and 2
packs of disinfectant (KAY5,28.4g/ package)
into disinfectant solution (the amount of
disinfectant is adjusted according to the
amount of cleaning parts needed).
2. Soak the cleaned parts in the disinfectant.
While soaking the parts, spray the disinfectant
evenly and completely on the surface of the
parts in contact with the ice, such as evaporator
ice grid, ice baffle, ice storage bucket, etc .(the
dead corner can be wrapped with disinfectant
wet rag wrapped in disposable chopsticks
cleaning).
Loading ...
Loading ...
Loading ...