Loading ...
Loading ...
Loading ...
5
This appliance is solely for domestic,
not professional use.
Do not use the appliance outdoors.
Do not store explosive or ammable
substances, such as aerosol cans, and
do not place or use gasoline or other
ammable materials in or near the
appliance: a re may break out if the
appliance is inadvertently switched
on.
No other use is permitted (e.g.
heating rooms).
INSTALLATION
The appliance must be handled and
installed by two or more persons.
Use protective gloves to unpack and
install the appliance.
Installation and repairs must
be carried out by a qualied
technician, in compliance with the
manufacturer’s instructions and local
safety regulations. Do not repair or
replace any part of the appliance
unless specically stated in the user
manual.
Children should not perform
installation operations. Keep children
away during installation. Keep the
packaging materials (plastic bags,
polystyrene parts, etc.) out of the
reach of children, during and after the
installation.
After unpacking the appliance, make
sure that it has not been damaged
in transit. In the event of problems,
contact the dealer or your nearest
After-sales Service.
The appliance must be disconnected
from the power supply before any
installation operation.
During installation, make sure the
appliance does not damage the
power cable.
Only activate the appliance when the
installation has been completed.
After installation, the bottom of
the appliance must no longer be
accessible.
Carry out all cabinet cutting works
before tting the appliance in the
furniture and carefully remove all
wood chips and sawdust.
Do not obstruct the minimum gap
between the worktop and the upper
edge of the oven.
Only remove the oven from its
polystyrene foam base at the time of
installation.
Do not install the appliance behind a
decorative door - Risk of re.
ELECTRICAL WARNINGS
For installation to comply with
current safety regulations, an omni-
polar switch with minimum contact
gap of 3 mm is required and the
appliance must be earthed.
If the power cable is damaged,
replace with an identical one. The
power cable must only be replaced by
a qualied technician in compliance
with the manufacturer's instructions
and current safety regulations.
Contact an authorised After-Sales
Service.
It must be possible to disconnect the
appliance from the power supply by
unplugging it if the plug is accessible,
or by means of an accessible multi-
pole switch installed upstream of the
socket in conformity with national
electrical safety standards.
The rating plate is on the front edge
of the oven (visible when the door is
open).
In case of replacement of the power
cable, contact an authorised service
Loading ...
Loading ...
Loading ...