Loading ...
Loading ...
Loading ...
10
Maintenance
REMOVING THE SIDE GRILLES
The side accessory-holder grilles are equipped with two xing screws
(g. 3) for optimum stability.
1. Remove the screws and corresponding plates on the right and
left with the aid of a coin or tool (g. 4).
2. To remove the grilles, lift them up (1) and turn them (2) as shown
in g.5.
REPLACING THE LAMP
To replace the rear lamp (if present):
1. Disconnect the oven from the mains power supply.
2. Unscrew the lamp cover, replace the lamp (see note for lamp
type) and screw the lamp cover back on.
3. Reconnect the oven to the power supply.
N.B:
– Only use 25-40 W/230 V type E-14, T300°C incandescent lamps, or
20-40 W/230 V type G9, T300°C halogen lamps.
– The lamp used in the appliance is specically designed for
electrical appliances and is not suitable for household room
illumination (Commission Regulation (EC) No 244/2009).
– Lamps are available from our After-Sales Service.
IMPORTANT:
– If using halogen lamps, do not handle with bare hands as
ngerprints can damage them.
– Do not use the oven until the lamp cover has been
repositioned.
(Fig. 3)
(Fig. 4)
(Fig. 5)
Loading ...
Loading ...
Loading ...