Loading ...
Loading ...
Loading ...
I ENGLISH
Troubleshooting
_, Before contacting a Samsung authodzed service center, perform the following simple checks.
They may save youthe time and expense of an unnecessary call.
slow the b_ttery pack is almost discharged Change to a charged one
TAPEEND! slow When the remaining time on the tape
_sabout 2 m_nutes Prepare a new one
TAPEEND! no the tape reached its end Change to a new one
TAPE! slow there LSno tape in camcorder thsert a tape
If you want to record, release
P£O_CTrON!Slow the tape LSrecord protected the protection
D slow the camcorder has some mechanical 1 Eiect the tape
fault 2 Set to OFE
L 3 Detach the battery
C 4 Reattach the battery
R * If unresolved contact your
Ioca_service representa_ve
r_ slow mcisture condensafJon has formed in see below
the camcorder
•I, If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder,
on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the
unit may net operate correctly.
To prevent possible damage under these circumstances,the camcerder is fitted with a moisture sensor.
•I, If there is moisture inside the camcorder, I_1 (DEW) is displayed. If this happens, none of the functionsexcept cassette
ejection will work.
Open the cassette compartment and remove the battery.
Leave the camcorder for at least two hours in a dry warm room.
,&
Loading ...
Loading ...
Loading ...