Loading ...
Loading ...
Loading ...
-13-
-12-
▉ Descale
When the product works for 50 hours with steam function, the icon of “Descale” flashes and will
actively prompt you to do descaling and maintenance of the waterway.The descaling steps are
given below:
1. Add 6.8 oz white vinegar and 6.8 oz room-temperature water into the tank and mix them
thoroughly.
2. Place the water tank back into the product, select "Descale" mode, and start descaling by
pressing "Enter".
3. After "Descale" program runs for a period (about 25min), open the door when the buzzer
sounds, clean the liner, and take out the water tank to replace 16.9 oz water.
4. Place the water tank back into the product, close the door and press dial to continue cleaning
till the end of descaling.
5. Wipe up residual water on the liner, and open the door to any unpleasant odor.
▉ About water tank
1. The machine works only after pushing the filled water tank into the tank pedestal and
confirming with a short press of Select button.
2. If the "Water" icon on the display screen flashes with a prompt buzzing tone, this indicates
that there is no sufficient water in the water tank and the oven stops working. If this happens,
add water to the water tank immediately, push the water tank into the tank pedestal ensuring
it is pushed in place, and then confirm on the oven with a short press of Select button.
3. To keep cavity dry, you can select " Dry Up" function after each cooking. Better clean the
residue water with cloth or paper towel first.
▉ Cleaning and maintenance of stainless steel cavity
1. Dilute 0.8 oz washing soda into 5 oz warm water, and wipe up oil stains in the cavity.
2. Close the product door, select "Steam Clean" mode (please make sure that the water tank
has been filled with water), and start cleaning.
3. Steam can soften oil stains. After cleaning is complete, repeatedly wipe the liner with a clean
towel dipped in alkaline water until all the oil stains are removed.
4. Select "Steam Clean" mode to clean the liner again.
▉ Product cavity
Most cooking residues can be cleaned with a piece of cloth and gentle detergents,
supplemented by some hot water. In those areas with poor water quality, there may be a layer of
white sediment on the inner wall of the product, and it can be wiped with a piece of wet cloth,
supplemented by a little vinegar, and then cleaned with clear water. Meanwhile, the drip tray and
hook groove of the water tank should also be dried.
Cleaning of common stains
After use, please clean the liner with cleaning cloth, soft sponge or soft nylon brush dipped with
solution mixed with warm water and cleaning fluid. The longer the stains remains, the harder it is
removed.
Cleaning of stubborn stains
Stubborn stains such as those caused by baking are likely to be firstly soaked and cleaned with
a wet sponge if cleaned. They can be scraped with a scraper suitable for glass surface, if
necessary. They can be completely flushed with clean water after scraping.
Cleaning of relatively stubborn stains with an oven spray (neutral food grade).
It is preferred to clean up dirt (such as spills of juice and cake pulp)
when the tank or steaming and baking pan is still warm. For the
avoidance of scald, please make sure that the tank is not very hot
during cleaning.
To avoid the unrecoverable liner arising from yellowing, please clean
up spills of juice and other acidic liquid timely because they may cause
the yellowing inner container.
★ Attentions
To keep the best cooking effect, the tank and accessories are recommended to be timely cleaned
after each use.
In case of failure to timely clean them, accumulated oil stains will lead to have difficulties in
cleaning of the tank and accessories, affecting your use environment and experience.
Troubleshooting
For your safety, please press the Power button to turn off the oven before troubleshooting.
Faults Cause analysis Solution
No response
after the power
cable of the
oven is plugged
in
Contact a qualified electrician
for inspection and repair.
Please contact FOTILE to get
service arranged.
Re-plug the power cable plug.
Cause 1: Electrical outlet may be broken.
Please contact FOTILE to get
service arranged.
Cause 2: Undamaged power panel or
temperature probe.
Cause 2: The power cable may be loose.
and not plugged in to the electrical outlet
Cause 3: Loose connection wire
between control panel and power panel.
Insensitive button
Clean up the control panel.
Please contact FOTILE to get
service arranged.
Cause 1: Stains on control panel.
Cause 2: Control panel faults.
The fan still runs
after cooking
Wipe down the steaming and
baking pan with hot water and
mild dish detergent and then
dry it with a towel.
Steaming and baking pan will become
yellow due to presence of uncleaned
food.
Yellow Stain on
baking pan
Open the door for quick heat
dissipation.
The fan stops running after the
liner with roasting function is
lower than 158°F.
The fan stops running 20
minutes after the end of the
steaming function.
Cause 1:The temperature of the liner is
higher than 158°F after the end of the
roasting function.
Within 20 minutes after the end of the
steaming function.
Tips:
Loading ...
Loading ...
Loading ...