Loading ...
Loading ...
Loading ...
-21-
-20-
1. Modify temperature parameters.When preheating or operating, turn temperature/time
dial and enter the interface for modifying temperature parameters. Continue to
turn temperature/time dial to modify the temperature parameters, and confirm
your modification with a short press of temperature/time dial and enter the
interface for modifying time parameters at the same time.
Notes: If there is no operation for 10 seconds, it will return to the original work
interface.
2. Modify time parameters.Turn temperature/time dial to set time and confirm
the modification with a short press of temperature/time dial.
● Steps for modifying parameters in operation
2
1
2
1
Tips: When using the Dehydration mode, please use the humidity-controlled chip as required in
the menu. See the figure below for specific instruction.
● Pre-set Menus
1. Starting up and enter the homepage.
1
4. Start working. Please put food in the oven, close the door, and confirm to
start working by short pressing Select button.
2. Select the Pre-set menus. Turn Power dial to Pre-set menu and confirm your
selection with a short press; 2. Turn Temperature/time dial to preferred dish
(Dish codes from P01 to P40), and confirm your selection with a short press of
Temperature/time dial.
Notes: The current display time is the default time.
3. Set time.Turn Temperature/time dial to adjust time.
1
1
2
4
3
1
1
Notes:1. When preheating or cooking with the Pre-set menu, the cooking time
may be set withing a certain range by turning Temperature/time dial.
2. The dish names corresponding to the codes of pre-set menus can be
found in the instruction or on the inner surface of glass door.
6. Cooking completed.
5. Working.Time starts counting down.
Loading ...
Loading ...
Loading ...