Loading ...
Loading ...
Loading ...
Repair Section
48
(1) Removal of condenser fan and fan motor
1) Remove four (4) nuts and three (3) screws in the
location shown. Then remove fan motor wire.
2) Loosen the set screw using a hex key. Then
remove the fan and fan motor.
(2) Removal of evaporator fan and fan motor
1) Loosen the set screw using a hex key. Then
remove three (3) screws on the ring. Then
remove this ring and evaporator fan.
2) Remove evaporator fan motor wire, three (3)
screws on the ring and four (4) nuts from housing
while holding fan securely with one hand. Then
remove evaporator fan motor.
I002280
Nuts (4)
Screws (3)
Fan Motor Wire
I001797
Set Screw
I002281
Set Screw
Screws (3)
Ring
I002282
Screws (3)Nuts (4)
Loading ...
Loading ...
Loading ...