Loading ...
Loading ...
Loading ...
Operation Section
11
3.5 Air Flow
• Air drawn from the right side face passes through the condenser which extracts the heat. This
hot air is blown out through the upper exhaust air duct. Air taken in from the front face is cooled
by the evaporator and then blown through the cool air vent. All the air inlets are equipped with
filters, and the exhaust air duct is protected by metal grill.
3.6 Compressor and Fans
• The compressor is hermetically sealed. Two sets of a two-speed fan motor with a centrifugal fan
are used to draw air across the evaporator and condenser.
3.7 Drain Tanks
• A set of two 5.0 gal (19 L) drain tanks are supplied with the Office Pro 36. The condensate
(water) is collected into both tanks.
The drain switch activates and stops the operation when tanks reach the level of approximately
8.0 gal (30 L).
I001762
Condenser Air In
Evaporator Air In
Exhaust Air Out
Cool Air Out
Loading ...
Loading ...
Loading ...