Loading ...
Loading ...
Loading ...
Setting Warm Zone
Controls (. equipped)
Use the warm zone to keep cooked
foods hot such as: vegetables, gravies,
casseroles, soups, stews, breads,
pastries and oven-safe d nner plates.
S
OFF
HI
LO
MED
Warmer Zone Control
Warm Zone Recommended Food
Settings Chart
Food Item Heating
Level
Breads/Pastries LO
Casseroles LO
Dinner Plates with Food LO
Eggs LO
Gravies LO
Meats MED
Sauces MED
Soups (cream) MED
Stews MED
Vegetables MED
Fried Foods HI
Hot Beverages HI
Soups (liquid) HI
To Operate the Warm Zone
The purpose ofthe warm zone isto keep hotcooked foods at serving
temperature. Always startwith hot food. It is not recommended to heat cold
food on thewarm zone.
All food placed on the warm zone should be covered with a lid or aluminum
foil to maintain quality. For best results, when warming pastries or breads, the
cover should have an opening to allow moisture to escape. Do not use
plastic wrap to cover food. Plastic may melt onto the surface and be
very difficult to clean.
Use only dishware, utensils and cookware recommended for oven and
cooktop use on the warm zone.
Unlike the surface elements, the warm zone will not glow red
when it is hot.
Always use potholders or oven mitts when removing food from
the warm zone as cookware and plates willbe hot.
To Set the Warm Zone Control
1. To
set the control,push in and turnthe knob. The temperatures are -_
approximate, and are designated by HI, MED and LO. However, the t'2t
control can be set at any position between HI and LO for different levels of
heating.
2. When done, turn the control to OFF. The warm zone will remain warm
until the hot surface indicator light goes off.
Temperature Selection
Refer tothe chart in the side column for recommended heating levels. If a
particularfood isnot listed, startwith the medium level, and adjustas needed.
Most foods can be kept at serving temperatures by usingthe medium level.
Indicator Lights
The surface indicator light islocated belowthe warm zone control. Itturns
on when the controlisset, and stays on untilthe controlisturned off. The hot
surface indicator light, located under the glass cooktopor on the control
panel, willcome on when the controlis set and willcontinueto glowuntil the
glass cooktop has cooled downto a moderate level.
SIMMER SELECT KNOB INDICATOR UGHT
L
!
W/_IM & READyZONE
WARM & READY ZONE KNOB
The cooktop and control panel shown above are representational. Your range
may have a different design look and different features.
9
Loading ...
Loading ...
Loading ...