Kenmore 79095658000 electric range

User Manual - Page 20

For 79095658000.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Changing Oven Light
(some models)
Be surethe range is unpluggedand all parts are COOL before
replacing the oven light.Wear a leather-faced glove for protectionagainst
possible brokenglass.
To Change the Oven Light (some models)
On some models, the oven lightautomaticallyturns on when the door is
opened. Some modelshave a switch locatedon thecontrolpanel toturn on
the light.The oven lightis locatedat the rear ofthe oven and is covered witha
glass shield heldby a wire holder.The glass shield must bein place whenever
the oven is in use.
To replace the oven light:
1. Turn electrical poweroffat the main sourceor unplugthe range.
2. Press wire holderto one side to release the glass shield.
3. Replace bulbwith a new40 watt appliance bulb.
4. Replace glass shieldover bulb and snap wire holderintoplace.
5. Turn power backon again at the main source (orplugthe range back in).
6. The clock(ifequipped) willthen need to be reset. To reset, see Setting
the Clock and Minute Timer in this Owner's Guide.
Adjusting Oven
Temperature
Note: The adjustments madewill not
change the self-cleaning temperature.
The temperature in the oven has been set at the factory.When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is
too hot or too cool, the temperature in the oven can be adjusted. Before
adjusting, test a recipe by using a temperature settingthat is higher or lower
than the recommended temperature. The baking results should help you to
decide how much of an adjustment is needed.
To Adjust Oven Temperature:
1, Push (_.
temperature to550°F (287°C) bypushingand holdingthe (_.
2. Set the
seconds, pushand hold _ untilthe special2 digitdisplay
3,
Within 2
appears. Release _ The display now indicatesthe amount of
degrees offsetbetween the originalfactorytemperature settingand the
current temperature setting. If the oven controlhasthe originalfactory
calibration,the display willread "00,"
4. The temperature can now be adjusted up or down35°F (17°C), in 5°F
(1°C) steps, by pushingand holdingthe (_ or (_. Adjust untilthe
desired amountof offsetappears in the display.
you have made the desired adjustment, push _ to go back to
5. When
the time of day display.When adjusting oven temperature, a minussign
(-) willappear before the number to indicatethat the oven willbe cooler by
the displayed amountof degrees.
20
Loading ...
Loading ...
Loading ...