Loading ...
Loading ...
Loading ...
Oven smokes excessively during
broiling.
Poor baking results.
Self-cleaning cycle does not work.
Control(s) not set properly. Follow instructionsunder Setting Oven Controls.
Make sure oven door is opened to broil stop position.
Meat too close to the element. Reposition the rack to provide proper clearance
between the meat and the element. Preheat broil element for searing.
Meat not properly prepared. Remove excess fat from meat. Cut remaining fatty edges
to prevent cuding, but do not cut into lean.
Grid on broiler pan wrong side up and grease notdraining. Always place grid on the
broiler pan with ribsup and slotsdown to allow grease to drip intopan.
Soil not completely removed after self-
cleaning cycle.
Flames inside oven or smoking from
vent.
Scratches or abrasions on cooktop
surface.
Grease has built up on oven surfaces. Regular cleaning is necessary when broiling
frequently. Old grease or food spatters cause excessive smoking.
Many factors affect baking results. Make sure the proper rack position is used. Center
food in the oven and space pans to allow air to circulate. Allow the oven to preheat to
the set temperature before placing food in the oven. Try adjusting the recipe's
recommended temperature or baking time. If you feel the oven is too hot or cool, see
Adjusting Oven Temperature in this Owner's Guide.
Control(s) not set properly. Follow instructionsunder Oven Cleaning.
Self-cleaning cycle was interrupted.Follow steps under "Stopping or Interrupting a
Self-Cleaning Cycle" under Oven Cleaning.
Failure to clean bottom, front top of oven, frame of oven or door area outside oven
seal. These areas are not in the self-cleaning area, but get hot enough to burn on
residue. Clean these areas before the self-cleaning cycle is starled. Burned-on
residue can be cleaned with a stiff nylon brush and water or a nylon scrubber. Be
careful not to damage the oven gasket.
Excessive spillovers in oven. Set self-clean cycle for a longer cleaning time.
Excessive spillovers in oven. This is normal, especially for pie spilloversor large
amounts of grease on bottom of oven. Wipe up excessive spillovers before starting
cycle. If flames or excessive smoke are present, stopthe self-clean cycle and follow
steps under "Stopping or Interruptinga Self-Cleaning Cycle" in the Oven Cleaning
section.
Metal marks.
Coarse particles such as salt or sand between cooktop and utensils can cause
scratches. Be sure cooktop surface and bottoms of utensils are clean before usage.
Small scratches do not affect cooking and will become less visible with time.
Cleaning materials not recommended for ceramic-glass cooktop have been used.
See "Ceramic-Glass Cooktop Cleaning" in the General Cleaning section.
Cookware with rough bottom has been used. Use smooth, flat-bottomed cookware.
Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils
on cooktop surface. Use a ceramic-glass cooktop cleaning creme to remove the
marks. See "Ceramic-Glass Cooktop Cleaning" in the General Cleaning section.
Brown streaks or specks. Boilovers are cooked onto surface. Use razor blade scraper to remove soil. See
"Ceramic-Glass Cooktop Cleaning" in the General Cleaning section.
Areas of discoloration with metallic Mineral deposits from water and food. Remove usinga ceramic-glass cooktop
sheen, cleaning creme, Use cookware with clean, dry bottoms.
22
Loading ...
Loading ...