Kenmore 79047159400 Elite gas range

User Manual - Page 20

For 79047159400.

PDF File Manual, 80 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Consumer Defined Control Features
Setting Temperature Display -- Fahrenheit or Celsius:
The BROIL _o_"_ and CLEAN _A_ pads control the Fahrenheit or Celsius temperature display modes, The
oven
control can be programmed to display temperatures in Fahrenheit or Celsius, The oven has been preset at the factory to
mNSTRUCTmONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
PRESS DISPLAY
1, To tell if the display is set for Fahrenheit or Celsius press
_(figure 1 and hold for 7 "550 °" will in
) seconds;
appear
the display and a beep will sound, if "F" appears, the display is
set to show temperatures in Fahrenheit (Figure 2), if "C"
appears, the display is set to show temperatures in Celsius
(FigureS),
2, Press _LEAN"_to switch between Fahrenheit or Celsius
display
modes, The display wiii show either "F" (Figure 2) or "C"
(FigureS),
3, Press to accept the change or press _C["E_'R;_o reject the
change,
_for 7seconds
Figure 1
Figure 2
Setting Silent Control Operation
The STARTTIME @ and CLEAN _._ pads control the Silent Control operation feature, The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary, if desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps,
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation:
1, To tell if your range is set for normal or silent operation press
and hold @ for 7 seconds, "0:00" wiii appear and "DELAY"
will flash in the display (Figure 4),
2, Press _.._EA_to switch between normal sound operation and
silent operation mode, The display will show either ":SP" (Figure
5) or ":--" (Figure 6),
if ":SP" appears (Figure 5), the control will operate with normal
sounds and beeps, if ":- -" appears (Figure 6), the control is in
the silent operation mode,
3, Press to accept the change or press _CL-'E_R to reject the
change,
for 7seconds
G
STOP'
or CLEA_
2O
Figure 4
Figure 5
Figure 6
Loading ...
Loading ...
Loading ...