Loading ...
Loading ...
Loading ...
Setting the C ock
Setting the C_ock
The _o_ pad is used to set the chock, The chock may be set for 12 or 24 hour time of day
operation, The chock has been preset at the factory for the 12 hour operation, When the
range is first pHugged in, or when the power suppHyto the range has been interrupted, the
timer in the dispHay wHHflash with "PF" (power failure, See Figure 1),
When PF appears in the dispHay, press :CL--'_-R" NO sound wHHbe heard, but after 10 seconds a
beep wHHsounds and PF wHHdisappear,
mNSTRUCTmONS PRESS
To set the cNock (e×amp_e below for 1:30}:
1, Press _. "CLO" wHHappear in the dispHay (Figure 2),
2,
Press _ _ _ pads to set the time of day to 1_30
(Figure 3), "CLO" wHHappear in the dispHay, Press (_.
"CLO" wiHHdisappear and the chock wiHHstart (Figure 4),
Changing between 12 or 24 hour time of day display:
1, Press and hoHd_CLOC_ for 6 seconds (Figure 3), WhiHe hoHding
the pad down the current time of day wiHHremain and "CLO" wiHH
disappear from the dispHay (Figure 4), CONTHNUE hoHdingthe
pad untiHa beep is heard,
_foc 6 seconds
2, The dispHaywiHHshow either "12Hr" (Figure 5) or "24Hr" (Figure
6),
3, Press _._E_ to switch between the 12 and 24 hour time of day
dispHay,The dispHaywiHHshow either "12Hr" (Figure 5) or "24Hr"
(Figure6),
STOP
4, Press to accept the change or press _CL"E_'Rto reject the
change,
;STOP'
Or CLEA"_B
5, Reset the correct time as described in To set the Clock above,
PHeasenote that if the 24 hour time of day mode was chosen,
the chock wiHHnow dispHay time from 0:00 through 23:59 hours,
Figure 1
DISPLAY
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
.......ii......
17
Loading ...
Loading ...
Loading ...