Loading ...
Loading ...
Loading ...
Fig. 15
u
If affixing the unit under a worktop, use 2 screws to secure
the fixing bracket under the worktop.
Fig. 16
u
If attaching the unit at the side, screw the fixing bracket into
the recess with one screw on each side.
4.3.2 Fitting the unit door
u
Fit the handle on the unit door.
Note
To ensure uniform extension of the pull-out compartment:
u
Always fit the unit door handle to the middle of the unit door.
Fig. 17
u
Check 8 mm presetting. (Distance between appliance door
and lower edge of crosspiece)
u
Push up assembly aids
Fig. 17 (12)
to unit door height.
Lower edge ▲of the assembly aid = top edge of the unit
door to be fitted.
u
Unscrew fastening crosspiece
Fig. 17 (11)
by undoing the
locknuts
Fig. 17 (10)
.
Fig. 18
u
Attach fastening crosspiece
Fig. 18 (11)
to the inside of the
unit door using the assembly aids
Fig. 18 (12)
.
u
Align the crosspiece
Fig. 18 (11)
in the middle of the door.
w
Distances to the outer edge are equal at the left and right.
For chipboard doors:
u
Secure the fastening crosspiece
Fig. 18 (11)
with at least 6
screws
Fig. 18 (19)
.
For frame and panel doors:
u
Secure the fastening crosspiece
Fig. 18 (11)
with 4 screws
Fig. 18 (19)
at the edge.
u
Raise the assembly aids
Fig. 18 (12)
for removal, turn them
and insert them into the adjacent openings.
Fig. 19
u
Attach the unit door to the adjusting bolts
Fig. 19 (13)
and
loosely screw the locknuts
Fig. 19 (10)
onto them.
u
Close the door.
u
Check the gap between the door and the surrounding unit
doors.
u
To laterally align the door: push unit door in X direction.
u
To align the door vertically Y and in the lateral inclination:
adjust adjusting bolts
Fig. 19 (13)
with a screwdriver.
w
The unit door is flush and in alignment with the surrounding
unit fronts.
u
Tighten locknuts
Fig. 19 (10)
.
Fig. 20
u
To screw the unit door to the appliance door:
Putting into operation
8 * Depending on model and options
Loading ...
Loading ...
Loading ...