Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 91914779747/B
e
3. Descaling starts. The heating elements are
activated for the first 10 minutes of the
process.
4. After 10 minutes, the heating elements
switch off while the descaling procedure
continues for 50 minutes.
At the end of the descaling process, the
appliance makes a beep. The indicator light
comes on to indicate the request to drain
the water softener.
Reservoir draining
1. Open the door
2. Place the deep pan on the second shelf
from the bottom. Push it against the rear wall
of the oven cavity.
3. Press the button to start the function.
The descaling solution starts to flow into the
deep pan from the drain pipe on the right side
of the rear wall of the oven cavity.
4. Wait for the end of the drain flow.
A beep sounds when finished.
5. Drain the descaling solution from the deep
pan.
Rinse
Once the descaling agent has been drained,
the hydraulic circuit must be rinsed with clean
water.
The display will show the request to fill the
reservoir with water.
1. Open the door.
2. Place the deep pan on the second shelf
from the bottom. Push the tray up against the
rear wall of the oven cavity.
3. Pull the loading drawer out of its housing.
4. Insert the funnel provided in the loading
drawer.
5. Using a bottle or measuring jug, pour in
enough water to allow some to overflow
into the oven cavity (about 1.2 litres is
recommended).
6. Press the button to start the function
and wait one minute.
At the end, the appliance makes a beep and
the display shows the request to drain the
reservoir (the indicator light comes on).
7. Press the button again to start the
function.
8. Wait for the end of the drain flow.
A beep sounds when finished.
9. Drain the water from the deep pan.
The display shows the new request to fill the
reservoir with water.
10 Place the deep pan on the second shelf
from the bottom. Push it against the rear wall
of the oven cavity.
11. Pour one litre of water into the funnel placed
in the loading drawer (using a bottle or a
Each time the door is opened, the
function in progress stops and then
automatically restarts when the door is
closed again.
Take care: the descaling solution may
be still hot.
Use cold tap water which is not too
hard, softened water or still mineral
water.
Do not use distilled water, tap water
with a high chloride content (> 40 mg/
l), or other liquids.
The overflowing of water inside the
oven cavity is not intended as a
malfunction, rather it is part of the rinsing
procedure.
Loading ...
Loading ...
Loading ...