Loading ...
Loading ...
Loading ...
Ice and water
Water flow is
slower than
normal
Dispenser water is
not cold°
Water appears
dourly°
Particles in water
and/or ice cubes,
Water pressure is too low. Water pressure must be between 35 to 1O0
pounds per square inch to function
properly.
A minimum pressure of 35 pounds per square
inch is recommended for refrigerators with
Saddle valve not open Open saddle valve completely.
completely.
Improper saddle valve was See connecting the water supply,
installed, pages 9 - 10. Self--piercing and 346"(4.7 ram)
saddle valves cause low water pressure and
may dog the line over time, The manufacturer
is not responsible for property damage due to
Copper tubing has kinks. Turn off water supply and remove kinks,
If kinks cannot be removed, replace tubing_
Water filter is dogged or Change water filter (see page 25).
needs to be changed,
Water valve not opened
completely.
Refrigerator has been
recently installed.
Water supply in homing
tank has been depleted.
Air or air bubbles in water.
Carbon dust from water
filter cartridge.
Concentrations of minerals
in water will form particles
when water becomes
frozen and melts.
:: Open water valve completely and check
for leaks. The minimum flow at dispenser is
approximately 10 fluid ounces in nine seconds
with a new filter in place or approximately 10
fluid ounces in five seconds without a filter.
Allow approximately 12 hours for water in
holding tankto chill.
This is normal when first using the dispenser
and will disappear with use.
Initial water ejected through cartridge may
contain harmless carbon dust flushed from
cartridge. Will disappear after the first few
uses,
Particles are not harmful and naturally occur in
water supplies_
i
i
Loading ...
Loading ...
Loading ...