Loading ...
Loading ...
Loading ...
3
Shooting
55
t Memo
• You can change the movie settings in the C menus. (p.29)
• By default, autofocus is not performed when 0 is
pressed halfway during movie recording. If a compatible lens
is attached to the camera, you can select y in [AF Mode]
of [AF with Live View] in the C1 menu and continuously
autofocus even during movie recording. (p.63) When [AF
Mode] is set to y, the f button operation varies as
follows depending on the setting assigned to f in [Button
Customization] of the C2 menu. (p.106)
• The sound volume for recording a movie can be set in
[Recording Sound Level] of the C1 menu. When [Manual] is
selected, the sound volume can be set from 0 to 20.
• You can record a movie continuously up to 4 GB or 25
minutes. When the memory card is full, recording stops.
u Caution
•
Do not connect a microphone or other device outside the
recommended specifications to the microphone/cable release
terminal. Doing so may cause the camera to malfunction.
[Button Customization]
setting
Autofocus operation when
f is pressed
Enable AF1, Enable AF2
Pressing f performs
autofocus based on the [AF
Mode] setting.
Cancel AF
Pressing f stops autofocus
and pressing f again
restarts autofocus.
Using a Microphone or Cable Release
You can connect a commercially
available stereo microphone to
the microphone/cable release
terminal on the camera. Using an
external microphone can also help
to reduce the possibility of
recording camera operation
sounds.
The following specifications are
recommended for external
microphones. (A monaural microphone cannot be used with
this camera.)
You can also connect the optional Cable Switch CS-310 to
the microphone/cable release terminal on the camera. When
the cable release is connected, sounds are recorded with the
built-in microphone.
You can set the device to connect
in [External Input Devices] of the
D3 menu. Normally, you do not
need to change the default setting
([Auto Select]).
Microphone/cable
release terminal
Plug Stereo mini plug (ø3.5 mm)
Format Stereo electret condenser
Power
Plug-in Power Method (operating voltage of
2.0 V or lower)
Impedance 2.2 kΩ
Automatically detects inputAutomatically detects input
device and switches betweendevice and switches between
cable release and microphonecable release and microphone
External Input DevicesExternal Input Devices
External Input DevicesExternal Input Devices
CancelCancel OKOK
Loading ...
Loading ...
Loading ...