Loading ...
Loading ...
Loading ...
12
Section 4: Battery Life Reminder and Replacement Guide
The power indicator displays different status according to the remaining battery
power. When the batteries need to be replaced, the power indicator will ash in
blue and the system will beep while getting water (Figure 9).
Warning
Alarming
0
and ≤5
＜
0
Normal
>5
The blue light will be on after
touching any indicator slightly.
The blue light will ash (on
for 0.1s and off for 2s).
Off
No beep
Beep 3 times while
getting water
No beep
Reminding modes
Battery life indicator
Buzzer
Battery life
Remaining life (Day)
Figure 9
Replace the batteries:
1. Open the battery box and take out the old batteries.
Note: It is recommended to remove the batteries from the positive side to
prevent damaging the spring.
2. Take out the new batteries and remove the packaging.
3. Put them into the battery box starting from the negative side.
Note: The batteries may not be installed and damage the spring if you install
the batteries starting from the positive side.
After the installation of batteries, the system will beep. The lter life indicators
will ash blue, purple, and red in turn, and then stay on blue for 10 seconds.
Finally, the indicator will be off and enter energy-saving mode.
4. Close the battery box and nish the installation.
PP
Battery life indicator
Loading ...
Loading ...
Loading ...