Loading ...
Loading ...
Loading ...
7
Figure 6
4.68"
14.81"
Step 3:
Install the Batteries and Place the System
1. Press to open the battery box (Figure 6).
2. Take out 3 AA batteries and remove the packaging.
3. Install the batteries starting from the negative side, and put the 3 batteries into
the battery box in turn.
Note: The batteries may not be installed and damage the spring wire if you
install the batteries starting from the positive side.
4. After the installation of batteries, the system will beep. The lter life indicators
will ash blue, purple, and red in turn, and then stay on blue for 10 seconds.
Finally, the indicator will be off and enter energy-saving mode.
5. Close the battery box.
6. Check and ensure there is enough space under the countertop to install the
system (14.81
"
* 4.68
"
* 13.97
"
).
13.97"
Battery Box
Press
Loading ...
Loading ...
Loading ...