Loading ...
Loading ...
Loading ...
MAKING CUTS
The blade provided with lhe saw is a high-quaiity combi-
nation blade suitable for ripping and cross cut operations.
_ WARNING: Do not use blades rated tess than the
speed of this tool. Failure to heed this warning could
result in personal il,iury.
Use the miter gauge when making cross, miter, bevel
and compound miter outs. To secure the angle, lock the
miter gauge in place by twisting the leak knob clockwise.
Always tighten the tack knob securely in place before use.
NOTE: It is recommended that you place the piece to be
ea,_edon the _eftaide o{ the blade and that you make e
test cut on scrap wood first.
MAKING A CROSS CUT
See Figures 36 - 3&
WARNING: Using the rip fence as a cutoff gauge
when cross cuging will result in kickback which can
cause serious personal injury.
WARNING; Make sure the blade guard assembly
is installed and working properly to avoid possible
serious injury,
It is recommended you make teat cuts on scrap woad.
lu Remove the np fence by lifting the Ioekirg handle.
Set Ihe blade to the correct depth for the workpiece.
m Set the miter gauge to 0° and tighten the bck knob
CROS_ CUT
PLACELEFT}lANDON
W_BI|{P{ECEANB
MITEI_GAUGEHERE
SWITCH,KEY
SWITCHIN LOCREDPOSITION
Flg. 3i
U Place a support (the same height as saw table) behind
the saw for the cut work.
13 Make sure the wood is clear of the blade before turnini
cn the saw. I
B To turn the saw ON, lift the switch button. !
To turn saw OFF, press the switch button dovvn.
NOTE: To prevent unauthorized usa, remove the switch
key as shown in figure 38. I
8 Let the blade build up to full speed be ore moving the
warkpiece into the blade.
I
0 Hold the workpiece firmly with both hands on the mitai I
gauge arld feed tl7eworkplace into the blade,
B When the outis made, turn the saw off Wait for the :
blade to come to a complete slop before removing the
workpieee.
MAI{ING A RiP CUT
See Figure 38.
It is recommer_ded you make a test cut on scrap wood,
WARNING; 'vlake sure the blade guard assembly
is installed and working properly to avoid seriou_
possible injury.
E_ Position the rip fence the desired distance from the
blade for the cut and securely lock the handle. Adios i
the scale to zero at the cutting edge at the blade.
Fig. 36
2g
Loading ...
Loading ...
Loading ...