Loading ...
Loading ...
Loading ...
TO INSTALL BLADE GUARD ASSEMBLY
See Figure 14.
Prober installation of the blade guard assembly means
that the saw blade and spreader are in aligrlmenl.
ALWAYS align the spreader to the saw blade prior to turn
ing on the table saw.
Lower the blade.
la Install the blade guard assembly to !he mounting plate
using the wing nut. Partially retighten the wing nul
Check the blade and spreader alignment.
NOTE: Blade alignment with the spreader can be
adjusted for different blade widths, Refer to: To Cheek,
and Align the Spreader, Saw Blade, and Blade
Guard Assembly in the Adjustment section. Check the
blade guard assembly for clearances and free move-
ment.
El Tighten wing nut seculely.
TO INSTALL DUST BAG
See Figure 15.
13 Slide the elbow inside the dust chute on the back of
the table saw.
B Slide the dust bag into the elbow.
NOTE: For efficient operation, empty the dust bag before
it is half full. This wfll permit better air flow through the
bag.
MOUN'IING
PLATE
/Z/
AIITI-KICKBAI_K
PAWLS
i
SPRE!'_ER
WING :
Fig. !4
DUST
{;}IUTE
Fig. il5
_ WARNING: Do not allow familiarity with tools
to make you careless. Remember that a careless
traction of a second is sufficient to inflict severe
injury.
_ WARNING: Always wear safety gaggles or safely
glasses with side shields when operating tools,
Failure to do so could result in objects being thrown
into your eyes in possible serious injury,
_J_ WARNING: Do not use any attachments or
accessories not recommended by the manufacturer
o| this tool, The use of altat'_',ments or accessories
not recommended can resull in serious personal
injury,
_ WARNING: Allhough many of the illustrations in
this manual are shown with the blade gLJard removed
tot cladty, do r_ot operate the saw without the blade
guard unless soecilically instructed to do so,
19
Loading ...
Loading ...
Loading ...