Loading ...
Loading ...
Loading ...
Chop Cutting
90° Crosscut
a. Slide the cutting head to the rear as far as it will
go.
b. Lock carriage lock knob.
c. Position workpiece on table and against fence.
d. Turn on saw and lower blade into workpiece.
e. After cut is complete turn off saw, wait for blade to
come to a complete stop, allow cutting head to
rise up.
/
Miter Cut
When a miter cut is required, move the saw to the
desired angle. Do not stand in front of the saw table.
Move with the handle to the miter angle to make the
cut.
There are settings on the miter scale for angles
(degrees), crown molding, and rafter slope(s).
NOTE: Remember to loosen the miter lock handle
before changing the mite_"angle.
Bevel Cut
When a bevel cut is required, tilt the blade to desired
bevel angle. Stand to the left side of the handle to make
the cut.
17
Loading ...
Loading ...
Loading ...