Loading ...
Loading ...
Loading ...
MOUNTING THE SAW
I WARNING: To avoid injury: I
Before moving the saw:
• Lock the miter, bevel and carriage.
• Unplug the power cord.
• Get help. This saw weighs 70 pounds. To avoid
back injury, get help whenever you need to tiff it.
NEVER carry the saw by the cord or power head han-
dle The handle could break suddenly. Damage to tnsu-
lation could cause an electric shock. Damage to wire
connections could cause a fire.
DANGEROUS ENVIRONMENT. Use the slide com-
pound miter saw _na dry, indoor place protected from
rain. Keep work area welI lighted.
Place the slide compound miter saw so neither the user
or bystanders are forced to stand in line with the blade
Thrown debris could injure people in its path.
To avoid injury from unexpected saw movement:
• Put the slide compound miter saw on a firm level
surface where there is plenty of room for handling
and properly supporting the workpiece.
• Support the slide compound miter saw so the table
is level and the saw does not rock.
• Loosen the set screw locking the "U"-shaped
extension on the rear of the saw. Slide the bracket
out to support the saw. Retighten the set screw.
• Bolt or clamp the saw to its support.
Place the saw on a work bench. The base of the saw
has three holes to mount the compound slide miter saw
(see illustration). If the saw is to be used in one loca-
tion, fasten it to the work bench
Mounting Hole
Mounting Hole
i -- Set Screw
Mounting Hole
_xtension
Extension 1_ '_/'---_ _/
/'
/
[
If the saw is to be used in a portable application, mount
the saw to a 1/2" piece of plywood. Then clamp the
mounting board down to prevent it from tipping or
slipping.
13
Loading ...
Loading ...
Loading ...