Loading ...
Loading ...
Loading ...
Location:
Posture. Ensure when mounting the machine that the chosen location does not lead to unhealthy
psoture or repetitive strain during normal operation.
Lighting. Adequate lighting must be provided to ensure no operations are light impaired possibly
leading to injury.
Reach. Do not reach over or around the machine at any time.
Unexpected start-up:
Remove the plug. Remove the plug from the socket before carrying out adjustment, servicing or
maintenance.
Errors of fitting:
Tools. Ensure a suitable tool for the job in hand is securely and correctly fitted prior to starting the
machine. Guards shall be fitted and in place at all times.
Stability:
Toppling. The drill shall be securely bolted down to a suitable and level surface to prevent the
machine from overturning and leading to injury.
Slipping. Ensure the area is clean of any residue cutting/lubrication fluid and any other materials
which may lead to a slip, trip or other such hazard.
General:
Limits. This machine is designed for milling and drilling work pieces up to 300 x 200 x 200mm.
Training. Only persons trained in the procedures involved with milling and drilling are permitted to
operate this machine.
Always wear the appropriate safety goggles when operating this machine.
Never leave this machine unattended.
5.3 RESIDUAL RISK
Important: Although the safety instructions and operating manuals for our tools contain extensive
instructions of safe working with power tools, every power tool involves a certain residual risk
which can not be completely excluded by safety mechanisms. Power tools must therefore always
be operated with caution!
– 9 –
5. HEALTH AND SAFETY INFORMATION
Loading ...
Loading ...
Loading ...