Loading ...
Loading ...
Loading ...
4. INTRODUCTION
4.1 SCOPE
This machine type is classed as a mini vertical mill which is capable of performing face milling and
boring operations intended to shape cold metal by the use if a rotating cutting tool. Any application
other than that it was designed for is considered misuse.
4.2 SPECIFICATION
Stock no. ................................................................................................................................... 34023
Part no. .............................................................................................................................MILL-170A
Rated voltage ............................................................................................................................230V
Rated frequency .........................................................................................................................50Hz
Rated input ...............................................................................................................................500W
Speed settings ...................................................................................................................2(low/high)
Revolutions per minute (no load) ........................................................................ 0-1100/0-2500min-1
Drilling capacity ........................................................................................................................ 13mm
End milling capacity .................................................................................................................. 16mm
Face milling capacity ................................................................................................................ 30mm
Spindle taper ............................................................................................................................... MT3
Throat ..................................................................................................................................... 170mm
Headstock travel ..................................................................................................................... 180mm
Face milling capacity:
Cross axis travel ............................................................................................................ 100mm
Longitude axis travel ..................................................................................................... 220mm
T slot ................................................................................................................................ 12mm
Headstock tilt ...............................................................................................................................±45°
Table dimensions ............................................................................................................ 390 x 92mm
Sound power level ................................................................................................................. 78dB(A)
Weight (gross) ............................................................................................................................ 60kg
4.3 HANDLING AND STORAGE
– Care must be taken when handling this product. Dropping this power tool could have an effect
on its accuracy and could also result in personal injury. This product is not a toy and must be
respected.
– Environmental conditions can have a detrimental effect on this product if neglected. Exposure
to damp air can gradually corrode components. If the product is unprotected from dust and
debris, components will become clogged. If not cleaned and maintained correctly or regularly,
the machine will not perform at its best.
– 6 –
Loading ...
Loading ...
Loading ...