Loading ...
Loading ...
Loading ...
1 FIG.
FIG.2
– 13 –
8. ASSEMBLY INSTRUCTIONS
Note: With the exception of some minor assembly,
this machine comes “ready to run” straight from the
packaging.
8.1 HANDLE ATTACHMENTS – FIG.1
Both the longitudinal and cross feed wheels require
the handle to be fitted.
– Pass bolt (A) through the handle (B) and
thread on nut (C).
– Screw the bolt (A) into the threaded hole in
wheel (D).
– When enough of the thread from bolt (A) is
screwed into handle (D), hold bolt (A) firmly
with a flat blade screwdriver while tightening
nut (C) back onto wheel (D). This locks the
thread preventing bolt (A) coming loose while
making adjustments.
8.2 INSTALLATION – FIG.2
Before the machine can be used, a suitable
location must be found. The area must be flat, level
and be able to comfortably accommodate the
weight of this machine and any workpieces.
The area must also be well lit and provide
adequate space around the machine to allow for
odd shape workpieces.
Warning! Any manual lifting or transportation of
this machine must be carried out by more than one
person.
With a suitable location chosen, mark and drill
mounting holes in the workbench. As fixings are
not supplied, suitable ones must be found.
This type of machine should be mounted on a
rubber mat specifically designed to absorb and
reduce the transfer of vibration.
Areas liable to excess dust, moisture and direct
sunlight should be avoided.
Note: Before first use - follow the initial starting
instruction and remove any anti-rust protection
which have been applied for transportation.
(B)
(C)
(D)
(A)
Loading ...
Loading ...
Loading ...