Loading ...
Loading ...
Loading ...
Installation Instructions
1
9
B
5.
MOUNT THE MICROWAVE OVEN
FOR EASIER INSTALLATION AND PERSONAL
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.
IMPORTANT: Do not grip or use handle during
i
nstallation.
NOTE: If your cabinet is metal, use the nylon
grommet around the power cord hole to prevent
cutting of the cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT: If filler blocks are not used, case
damage may occur from over tightening screws.
NOTE: When mounting the microwave oven, thread
power cord through hole in bottom of top cabinet.
Keep it tight throughout Steps 1–3. Do not pinch cord
or lift oven by pulling cord.
3.Insert a self-aligning s
crew through top center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after the
threads have engaged. (It will be completely
tightened later.) Be sure to keep power cord
tight. Be careful not to pinch the cord,
especially when mounting flush to bottom of
cabinet.
4.Attach the microwave oven to the top cabinet.
7.
Tighten the outer two screws to the top of the
mic
rowave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
8.Install grease filters. See the Owner’s Manual
packed with the mic
rowave.
2.Rotate front of oven
u
p against cabinet
bottom
1.Lift microwave, tilt it
forwa
rd, and hook slot
s
a
t back bottom edge
onto four lower tabs of
mounting plate.
Cab
inet Front
Self-Aligning Screw
Equivalent to
Depth of Cabinet
Recess
Microwave Oven Top
Filler Block
Cabinet Bottom Shelf
6.Tighten center
screw co
mpletely.
5.
Insert 2 self-aligning screws
through ou
ter top cabinet holes.
Turn two full turns on each screw.
Loading ...
Loading ...
Loading ...