Loading ...
Loading ...
Loading ...
Installation Instructions
8
1. PLACEMENT OF THE MOUNTING PLATE
A.
REMOVING TH
E MICROWAVE
OVEN FROM THE CARTON/
ASSEMBLE THE MOUNTING
PLATE
1.
Remove the installation ins
tructions, filters, glass
tray and the small hardware bag. Do not remove
the Styrofoam protecting the front of the oven.
2.Fold back all 4 carton flaps fully against carton
s
ides. Then carefully roll the oven and carton over
onto the top side. The oven should be resting in
the Styrofoam.
3.
Pul
l the carton up and off the oven.
4.
Remove and p
roperly discard plastic bags.
B.
F
INDING THE WALL STUDS
1.Find the s
tuds, using one of the following
methods:
A. Stud finder–a magnetic device which locates
nails.
OR
B. Use a hammer to tap lightly across the
mounting surface to find a solid sound. This
will indicate a stud location.
2.A
fter locating the stud(s), find the center by
probing the wall with a small nail to find the edges
of the stud. Then place a mark halfway between
the edges. The center of any adjacent studs
should be 16" or 24" from this mark.
3.Draw a line down the center of the s
tuds.
THE MICROWAVE MUST BE CONNECTED TO AT
LEAST ONE WALL STUD.
C
arton
Styrofoam
W
all Studs
Center
5.
y
ou will be able to assemble it take following
picture.
Mounting-Plate
Wire-Mounting
Loading ...
Loading ...
Loading ...