Loading ...
Loading ...
Loading ...
Installation Instructions
7
TOOLS YOU WILL NEED
# 1 a
nd #2 Phillips screwdriver
LevelSafety goggles
Stud finder or Hammer (optional)
Saw (saber, hole or keyhole)
Gloves
Scissors
(to cut template, if necessary)
Pencil
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Duct and masking tape
Ru
ler or tape measure
and straight edge
Carpenter square
(optional)
Tin snips (for cutting
damper, if required)
Electric drill with
3
/16
"
, ½"
and
5
/8
" d
rill bits
MOUNTING SPACE
NOTES:
• The space between the cabinets must be
30" wide and free of obstructions.
• I
f the space between the cabinets is greater
than 30", a Filler Panel Kit may be used to fill
in the gap between the microwave oven and
the cabinets. Your Owner’s Manual contains
the kit number for your model.
• This microwave oven is for installation over
ranges up to 36" wide.
• If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
• When installing the microwave oven
beneath smooth, flat cabinets, be careful
to follow the instructions on the top
cabinet template for power cord
clearance.
Backsplash
16-½ "
3
0"min.
2"
3
0
"
66
" or more
from the floor
to the top of the
microwave
Bottom edge of
cabinet needs
to be 30" or
more from the
cooking
surface
Loading ...
Loading ...
Loading ...