Loading ...
Loading ...
Loading ...
i
Oven Door
oven door. This CouM cause the range to tip over, break
the d00r, 0r k_Jurethe user.
I Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Leveling Legs
from accidentally tipping,
Electrical Connection
Appmianceswhich require emectrical power
are equipped with a three-prong
grounding plug which must be plugged
directly into a properly grounded three-
hob 120 volt electrical outleL
A/ways disconnect power to appliance before servicing.
The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the
appliance owner to have the outlet replaced with a
properly grounded three-home electrical outlet.
Oven Light
DRsconnect power to range before replacRng I ght bulb.
- Make sure bu!b cover and bulb are coo! before touching.
To replace oven light bulb:
1. When oven is cool, hold bulb cover auLacovER
in place, then slide wire retainer
off cover. NOTE: Bulb cover
wiii fail if not held in place
while removing wire retainer.
2. Remove bulb cover and light
bulb. _ETA_,_
3. Replace with a 40-watt appliance bulb.
4. Replace bulb cover and secure with wire retainer.
5. Reconnect power to range. Reset clock.
19
Loading ...
Loading ...
Loading ...