Loading ...
Loading ...
Loading ...
5
SAFETY AND WARNINGS INTEGRATED COLUMNS — WINE CABINET
INSTALLATION
Cavity preparation
z
The anti-tip bracket and fittings supplied must be fitted tothe wall of the finished
enclosure to withstand a 225lb/100kg load.
z
Ensure that the anti-tip bracket is installed correctly to prevent the possibility of the
appliance tipping forward when the door is open.
Positioning inside the cabinetry
z
DO NOT attempt to open the door until the appliance is fully installed.
z
Ensure the door of the appliance is closed when rolling into thecabinetry.
z
Ensure the power cord is not run over or damaged when rolling the product
into the cabinetry.
Aligning inside the cabinetry
z
Ensure the doors are in line with the cabinetry front and the appliance iscentred.
z
All four corners of the appliance must be supported firmly onto the floor to eliminate any
movement. Installing the appliance on a soft, uneven, or not level floor may cause twisting
and poor door sealing.
Fixing inside the cabinetry
z
Use low speed, low torque setting when using a powered driver for the screws when fixing
or aligning the product.
z
Make sure to remove the depth alignment brackets before fixing theappliance inside
the cabinetry.
z
Open the appliance door to remove the alignment brackets from both sides of the
appliance, and then re-tighten the screws.
Door panel installation
Stainless steel
z
Protect the finish of the Fisher & Paykel Stainless Steel door panels from any
scratch or damage.
z
Leave the protective film on the panels when hanging and remove the film only when the
installation is complete.
Custom
z
If using Custom door panels, ensure they are prepared as per 'Custom door panel
dimensions' section.
z
Ensure the screw pilot holes do not penetrate the full depth of the panel.
z
Do not place the handle holes in marked areas to avoid clashing with panel
attachment brackets.
z
Minimum panel thickness where screw hole is drilled must be 16mm.
Door hinge change
z
Door hinges are interchangeable for each model. A hinge change kit is available
and can be purchased separately if you prefer to change from ‘right hand hinge’ to
‘left hand hinge’ or vise versa.
RS2484VL2K1
RS2484VR2K1
Loading ...
Loading ...
Loading ...