Loading ...
Loading ...
Loading ...
4
!
WARNING!
Electric Shock Hazard
Read and follow the safety and warnings
outlined in this installation guide before
operating this appliance.
Failure to do so can result in death, electric
shock, fire or injury topersons.
!
WARNING!
Cut Hazard
Take care—panel edges are sharp.
Failure to use caution could result in injury
or cuts.
!
WARNING!
This appliance is top-heavy and must
be secured to prevent the possibility of
tippingforward.
To ensure that the appliance is stable under
all loading conditions, theanti-tip bracket
and fittings supplied must be installed
according tothe following installation steps
by a professional installer.
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
BEFORE INSTALLATION
z
The appliance has front and rear rollers for moving the appliance forward and backward.
Do not move the appliance sideways to avoid damaging the rollers or the floor
covering/surface.
z
Ensure your appliance is not exposed to any heat generating appliance eg cooktop,
oven or dishwasher.
z
The appliance must be installed by a qualified installer, or Fisher & Paykel trained and
supported service technician to avoid faulty electrical connection.
z
All connections for electrical power and earthing must comply with local codes and
ordinances and be made by licensed personnel when required.
z
Avoid installation of the appliance/s under a ground fault circuit interrupter (GFCI).
z
Ensure the appliance is installed properly. Improper installation that results in appliance
failure is not covered under the appliance warranty.
UNPACKING
z
The appliance is heavy (including packaging — 302lb/137kg) and requires at least
twopersons to move and install. Avoid scratching the surface of your appliance when
moving or installing.
z
Keep the appliance stable and door closed to prevent tipping over when moving to
installation location.
z
Ensure feet of the appliance are retracted before moving to installation location.
z
If appliance is damaged, contact your Fisher & Paykel dealer.
z
Check all components and accessories are complete. Refer to 'Components' page.
z
Record the model and registration numbers for future servicing or repair of
your appliance.
ELECTRICAL
z
Electrical connection for these appliances must be located in an adjacent area or unit
(cabinet or cupboard) that is easily accessible in case of repair or disconnection.
z
Once installed, the service technician will NOT remove the appliance from the cavity to
gain access for repair.
WARNING!
z
Electric shock hazard! Assume all parts live.
z
Disconnect supply before servicing and installation.
Loading ...
Loading ...
Loading ...